Finally, getting affected by the LED strip lights fever? That’s great! In a very short period, these blinking strip p lights have impacted around the globe.
Especially in the North American region where strip lights are everywhere. Like practically everywhere!
These strip lights can fit into any place, from homes to offices, perfectly. That’s why we decided to help you out again this time.
The guide will thoroughly take you from all the necessary sections to stick LED strip lights on the wall.
Is the wall a better option for LED strip placement?
No proven result states against the placement of LED strip lights on the wall. Many people prefer putting LED strips on the wall. The same trend is followed for flat surfaces that can ensure the sticking of LED strips.
But compared to the ceiling, the idea of sticking LED strip lights on the wall surely has its cons.
A major one is that the LEDs this way will be constantly exposed to human interaction, and the circuit may short circuit in case of an accidental blow.
The Magic of 3M Adhesive back
Also, adhesion is another reason why people are not that confident about sticking LED strips on the wall. The LED strips have adhesive backs that are very easy to use and stick.
Take the protective covering off; voila, you can stick LED strip lights on the wall and anywhere. But this is only possible if the LED strip lights have a 3M adhesive back.
The 3M adhesive back allows the LED strips to stick with a very strong bond for a very long time. Be sure that the LED strips you buy come with 3M adhesive backs. The ordinary adhesive won’t be effective.
Have you got all the necessary equipment to begin?
Okay, time to get right on the field with the mission to beautifully place LED strip lights on the wall. Wait, do you forget something? Yes, we know that you are the smart one, and remember that you need to check all the necessary components before commencing.
Well, the very thing you will need is LED strip lights. Make sure they are of good quality and don’t worry about the exact measurements if you still haven’t taken them. Just buy an LED strip with an average length, a sharp cutter, and some handy connectors.
- Taking the exact measurements
The first step in sticking LED strip lights on the wall is to take the exact measurements. The measurements are the only things that can tell how much you should cut to cover the whole area perfectly.
No one likes hanging wires on the walls. Not so aesthetic at all. Also, the measurements must be precise as it is the only way to determine the power output placement. This will ensure that everything is tidy and properly managed.
- Be very specific with size cutting.
Now that you have taken the exact measurements, it is time to move on to the next step. Yes, now you have to show some exceptional cutting skills. But chances are you won’t require much cutting.
The process of sticking LED strip lights on the wall is not so curving. The majority of the walls are straight within a square or rectangle-shaped room.
But if the walls have some design/curvature that you want to cover, it is better to cut. Don’t worry; you can always reconnect the segment of strips when you think it is the right approach. You also need to cut strips at the marked cutting points.
- Clearing the surface to stick LED strip lights
This is where most the rookies make mistakes. They hastily start taking off the protective layers and sticking LED strip lights on them. Well, if your LED strips don’t have a 3M adhesive rating, there’s no way they will stick on a debris-packed wall.
That’s right, and walls also have debris. From dust particles to uneven bumps, there is a lot of debris on the wall, powerful enough to fail the whole LED strip stick. That’s why try to examine and clear the wall thoroughly. Once that is done, you can start working on the sticking part.
- Expose the adhesive surface with caution
We are dedicating a whole section to this step because we have gone through reports exposing another common rookie mistake. When you buy LED strips from the market, they come with an adhesive back! Most users believe that their LED strips don’t have adhesive backs.
Guys, LED strips have adhesive backs; a thing protection sheet just protects them. Just take the sheet off to stick LED strip lights on the wall, and that’s it. You don’t need to pore adhesives on your own without any reason.
- Position the LED strip lights according to measurements
The position of the LED strips must be monitored from time to time. And we are not just encouraging you to monitor the position from proximity. After all, the bigger picture of how you want the whole thing to look is in your head. This makes the LED strip placement 10x important.
Here’s a trick, mark certain lengths and cut those lengths into certain segments. Once you have covered one certain length of sticking the LED strips on the wall. Stop, take a few steps back, and see if you are satisfied with the results. If not, reposition the LEDs and get back to them.
- Switch on and witness the magic!
We know you can’t contain the happiness and excitement of finishing it all up. What do you want to do next? We know. Turn it all on and check how it looks compared to what you have in mind. If we were at your place, we would have wanted the same.
But wait, before witnessing the magic, it is important to check the connectivity of the whole circuit. The connectivity will help you analyze two things if the circuit is connected thoroughly. And second, if there is any short circuit waiting to be unleashed.
What if the LEDs begin to fall off after some time?
Amazing right? We knew that you would do a great job sticking LED strip lights on the wall. But there is still one thing that can go wrong. What if the LED strips begin to fall off after some time?
This is why we suggested you use a 3M adhesive surface-backed LED strip. Don’t worry; you can easily restick the LEDs from where they fell. All you need is a strong LED strip-friendly adhesive, and voila. Your LED strips will be back as new.
Final Note
We are glad that you are fully aware of the procedure necessary to stick LED strip lights on the wall. A last piece of advice, make sure that the LED strips do not cover the vents at any point.
If not properly maintained, they can increase the temperature of the strips as well as cause connection interference within the strips.
